Simultaneous distribution of Type 1 ultra-pure water of up to three dispensers using this water purification system.
Make the laboratory flexible with the ultra-pure water purification system Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus. Its advanced technologies allow for the simultaneous distribution of three maximum distance distributors for greater ease of use in laboratory environments where equipment is shared. This laboratory water system is supplied with leak detection, electronic distribution allowing fully automatic volume control and monitoring of the water supply which alerts the user in case of variations in water quality. All the consumables necessary for starting up are supplied with the system, allowing simple control and configuration.
xCAD (extended control and distribution)
This system provides greater flexibility for the distribution of ultra-pure water with a 32 in (80 cm) radius of action.
Simultaneous distribution on three maximum distributors
Each system comes with a single xCAD Plus remote distributor.
Integrated monitoring of feed water
Complementary measurement cells control the conductivity of the feed water.
COT measurement in line with UV intensity monitoring...
High-performance UV lighting to reduce the number of microorganisms and their metabolites.
Leak detection
An error message will appear when internal leaks are detected.
Loan for employment
The power supply water pressure switch, wall support, UV lamp, ultra-pure cartridge and sterile filter all carry the same reference number.
Features
This system provides greater flexibility for the distribution of ultra-pure water with a 32 in (80 cm) radius of action.
An ergonomic distribution arm allows the volume to be accurately measured by a simple button pressure.
The flexible dispenser offers several positions, including height adjustment, rotation or orientation to the tank.
A unique design puts all the control possibilities of the system at hand.
Each system comes with a single xCAD Plus remote distributor.
For more flexibility, add one or two additional xCAD Plus distributors.
Complementary measurement cells control the conductivity of the feed water.
If the water quality drops below the recorded value, an error message will be displayed immediately.
High-performance UV lighting to reduce the number of microorganisms and their metabolites.
UV oxidation also reduces the organic water compound content to extremely low levels.
An error message will appear when internal leaks are detected.
The power supply water pressure switch, wall support, UV lamp, ultra-pure cartridge and sterile filter all carry the same reference number.
Conductivity cells are carefully calibrated before each measurement via integrated reference resistance with cell constants at 0.01 cm-1.
Temperature measurements are made by a platinum chip sensor with an accuracy of ° 0.1±C
Technical specifications
General
Brand
Thermo Scientific
Description
Barnstead GenPure xCAD Plus UV/UF dispenser - COT, wall mounting
Model
Barnstead GenPure xCAD Plus UV/UF dispenser - COT, wall mounting
Product type
Water purification system
Performance
Conductivity
0.055 µS/cm
Endotoxin concentration
<0.001 UE/ml
Operating pressure
0.1 to 6 bar
Particles > 0.2 µm/ml
< 1
Temperature range (metric)
2°C to 35°C
Feedwater Connector
3/4 po
Flow
Up to 2 l/min
Type of production water
Type 1
Remote distributor
Yes
Resistivity
18.2 Mohm.cm at 25°C
TOC Monitor with UV Intensity Monitoring
Yes
Total organic carbon
1 to 5 ppb
Physical characteristics
Depth (metric)
330 mm
Height (metric)
615 mm
Width (metric)
372 mm
Electrical
Power supply
90/240 V, 50/60 Hz
Frequency
50/60 Hz
Electrical consumption
0.1 kW
Voltage
90/240 V
Monitoring of water supply
Integrated
Origin and customs
Manufacturer ref.
50136172
Country of origin
Sweden
HS customs code
8421 21 00 00
A question or a specific configuration? Contact us for a quote.