Rampe and filter holder for microbiology Sartorius Combisart® – Combisart, individual, 1x100 ml

Ref.: BL-EQ-926272Manufacturer ref.: 16219-CS
€990.08 excl. VAT

Rampe and filter holder for microbiology Sartorius Combisart® (ref. 16219-CS), Combisart, individual, 1x100 ml: Microbiological analyses by membrane filtration.

Reference
16219-CS
Brand
Sartorius

Rampe and filter holder for microbiology Sartorius Combisart® (ref. 16219-CS), Combisart, individual, 1x100 ml: Microbiological analyses by membrane filtration.

Stainless steel filter holders

Stainless steel supports differ in their funnel capacity (choice between 40 ml, 100 ml or 500 ml) and in their valve type (part numbers ending with CS have sterile ventilation). They are specially designed for applications in which particles or micro-organisms are to be collected from the surface of membrane filters. Their stainless steel sinter filter support ensures a uniform distribution of the particles collected over the entire surface of the filter membrane. Special features facilitate the use of these filter media during routine testing. Their stainless steel valves are easy to open and close, and it is only with one hand to use the special connector for safe fixing or practical removal of the funnel.

Glass filter holders

These filter supports are available with a 30 ml funnel (filter 25 mm in diameter) to filter small volumes or with a 250 ml funnel (filter 47) 50 mm in diameter for filtration of large volumes. They can be sterilized by self-claving (max. 134°C) or dry heat (max. 180°C). The glass sinter ensures a uniform distribution of the particles retained.

The polycarbonate filter media system

Type 16510 is complete with a receiving vial, and can be used with vacuum or low pressure (it is recommended 0.5 bar Type 16 511 is identical to 16.510 but without a receiving vial. It is designed for use on a vacuum flask or vacuum collector (e.g. Combisart® systems). Both types can be sterilized by self-claving (max. 121°C).

Multiple filtrations

Several samples in parallel.

Sterilizable

Flaming or self-closing according to the model.

Modular

Laboratory-adapted configuration.

Technical specifications

General
BrandSartorius
RangeCombisart®
Performance
Filter supportFixe
Specifications
Number of filter supports1
Filter holder materialStainless steel britty
Number of sintered products included1
Sterilisation proceduresBy autoclaving (max. 134 °C)
Materials
Quality of stainless steelHigh-grade stainless steel: B.S. 304S31-AISI 304
Physical characteristics
Diameter of the filter membrane adapted47 / 50 mm
Filter diameter⌀ 47 mm and ⌀ 50 mm
Filtration surface12.5 cm²
Connectivity
Output(for bypasses only) Cranked end, DN 10
Terms of use
Maximum operating pressure2 bar (29 psi)
Applications
ApplicationMicrobial count
IndustryFood & Beverage
MarketEnvironmental / Water test
UseReusable

Origin and customs

Manufacturer ref.16219-CS
Country of originGermany
HS customs code8421 99 90 00
A question or a specific configuration?
Contact us for a quote.