Laboratory pump Sartorius – Water pump, with G 3⁄4 female threading
Laboratory pump Sartorius (ref. 16611), Water pump, with G 3⁄4 female threading: vacuum filtration and transfer of liquids.
- Reference
- 16611
- Brand
- Sartorius
Laboratory pump Sartorius (ref. 16611), Water pump, with G 3⁄4 female threading: vacuum filtration and transfer of liquids.
Water pump with female thread G3/4
Microsart laboratory vacuum pump® e.jet has been designed to create a sufficient vacuum for filtration and, unlike traditional vacuum pumps, it allows simultaneous transfer of filtered liquid to a collection container. The Microsart transfer pump® e.jet is ideal for microbiology filtration of samples as it reaches a transmembrane pressure of less than 700 mbar in accordance with ISO 8999 (Water Quality - General Guidelines for Crop Counting Microorganisms). Constant flow rates and a defined maximum vacuum guarantee reliable and smooth filtration. The Microsart transfer pump® e.jet considerably reduces the complexity of operation and is an ideal accessory for ramps of 3 and 1 posts. The Microsart transfer pump® e.jet is designed to pump gas and liquids, which means that there is no loss of efficiency or malfunction of the water drawn from the pump head.
Microsart vacuum pumps® max.vac and Microsart® mini.vac are at the cutting edge of technology for daily use in a microbiology laboratory environment. These pumps are electrically membrane-shaped neoprene pumps; therefore, they are silent and do not require oil or maintenance. The vacuum produced by these pumps is controlled and can be easily adapted to your specifications. Thus, sensitive cells (e.g. bacteria) are concentrated under better conditions on the surface of the filter membrane, resulting in decreased cell mortality, higher recovery rates and shorter incubation times. The complete Sartolab RF vacuum unit, glass filter support, type 16309, and the 47 mm polycarbonate filter support, type 16510, are supplied with a filter recovery flask and can be connected directly to the vacuum source via a vacuum hose. All other filter supports shall be equipped with a vacuum flask or filter ramp. In addition to the vacuum hose and the vacuum source, a vacuum flask and a suitable stopper are required. The vacuum source can be either an electric pump, a water tube or a hand pump. Avoid filtered liquid passing through the electrical pump. This is possible by using a Vacusart unit with hydrophobic PTFE membrane when the vacuum flask is filled or when foam is present. When a water tube is used, this combination prevents any return of water to the vacuum flask. Furthermore, the use of a Woulff vial allows visual control. Such a vial is also useful for a simple vacuum adjustment with filter holders without vacuum control valve. Systems with multiple 16511 polycarbonate filter supports can be mounted directly on the ramp at 3 or 6 stations. Glass filter supports require adapters. The stainless steel filter supports can also be mounted with adapters and multiple ramps. The full multiple systems described on the previous page are much cheaper and easier to use. In addition, a vacuum hose and a vacuum source are required. When using an electric pump, a vacuum-resistant receptacle shall be inserted between the ramp and the pump. It is recommended that a Vacusart unit be inserted into the vacuum line between the receptacle and the pump. Other useful accessories, such as Brucelles clamps, are very important for the handling of membrane filters.
Fast filtration.
With ramps and supports Sartorius.
Daily use in the laboratory.
| General | |
|---|---|
| Brand | Sartorius |
| Type | Instrument |
| Pump type | Water Jet Pump |
| Performance | |
| Flow | Variable |
| Pump flow | No information available |
| Maximum viscosity. | < 150 cSt |
| Physical characteristics | |
| Dimensions (LxPxH) | 117 × 191 × 43 mm |
| Electrical | |
| Power supply | without power |
| Voltage | No voltage |
| Terms of use | |
| Operating pressure | No information available |
| Vide max. | Variable |
| Applications | |
| Application | Microbial count |
| Scope of application | Bioburden / Microbial count |
| Market | Food and Beverages Environmental / Water Test Pharma / Biotech |
| Compliance | |
| Certification | None |
| Manufacturer ref. | 16611 |
|---|---|
| Country of origin | Germany |
| HS customs code | 8413 81 00 00 |