Filter syringe Sartorius Minisart® SRP – 0.2 µm, Ø 25 mm – box of 500
Filter syringe Sartorius Minisart® SRP (ref. 1757A----------Q), 0.2 µm, Ø 25 mm, 500 box: rapid filtration of small volumes of samples.
- Reference
- 1757A----------Q
- Brand
- Sartorius
Filter syringe Sartorius Minisart® SRP (ref. 1757A----------Q), 0.2 µm, Ø 25 mm, 500 box: rapid filtration of small volumes of samples.
Minisart syringe filters® SRP with a clean and chemically inert PTFE membrane. The units are ready for use and allow the simple, fast and reliable ultra-cleaning of small volumes of samples for HPLC or CG analyses that require a much more chemically resistant unit than Minisart.® RC, e.g. for solvents such as acetone, dimethylformamide and DMSO, or for aggressive aqueous liquids. Minisart syringe filters® SRP ensures fast sterilization of small volumes with maximum comfort for the user. They offer high flow rates at low input pressures. Minisart SRP15 with a fine tip output is recommended for filtration in narrow neck flasks.
Sample cleaning
Particulate removal
Proven quality
Fully tested during manufacturing
| General | |
|---|---|
| Brand | Sartorius |
| Packaging | 500 units |
| Packaging | Bulk push packed |
| Range | Minisart® SRP |
| Type of sample | Air/Gas Solvent Harsh liquid |
| Performance | |
| Colour of filter paper / membrane | White (opac) |
| Flow | 1800 mL/min with air at 0,1 bar (1,5 psi) |
| Total flow rate | Up to 100 mL |
| pH range | 1.0 – 14.0 |
| Dead volume | 100 – 200 µL before bubble point |
| Specifications | |
| Sterilisation procedures | Ethylene oxide |
| Physico-chemical characteristics | |
| Moisture | Hydrophobic |
| bubble point | ≥ 1.1 bar (16 psi) with ethanol |
| Burst pressure | ≥ 7.0 bar (102 psi) |
| Without fibre release | This filter product meets the requirements of Chapter 21 of the Federal Regulations Code (CFR), Section 210.3(b)(6) and 211.72. |
| Retention threshold | 0.2 µm |
| Materials | |
| Constitutive material of the membrane | Polytetrafluorethylene (PTFE) |
| Body materials | Polypropylene (PP) |
| Physical characteristics | |
| Filter diameter | ⌀ 25 mm |
| Dimensions of the housing | 33 × 27 mm |
| Filtration surface | 4.8 cm² |
| Connectivity | |
| Inlet connection | Luer Lock female |
| Outlet connection | Hose Barb 4–6 mm Stepped |
| Terms of use | |
| Operating pressure | 4.5 bar (65 psi) |
| Maximum operating pressure | 4.5 bar (65 psi) |
| Maximum operating temperature | 121 °C (250 °F) |
| Sterility | |
| Delivery conditions | Non-sterile |
| Sterilization method | Autoclave diethylene oxide |
| Applications | |
| Scope of application | Sterile filtration Ventilation Moisture barrier |
| Compliance | |
| Biological responsiveness | All materials in this filter element meet the requirements of the USP <88> biological reactivity tests for Class VI plastics (systemic injection, intracutaneity and implantation tests). |
| Manufacturer ref. | 1757A----------Q |
|---|---|
| Country of origin | Germany |
| HS customs code | 8421 29 80 00 |