Sartolab® Sartorius Sartolab® P20 filtration unit (ref. 18068----------D), Sartolab P20 Plus, 0.2 µm PES Luer HB, batch of 10: sterilizing media filtration and solutions.
Sartolab P20 Plus for reliable sterile filtration of cell culture solutions. Ready-to-use unit that, connected to a membrane pump or pipe pump, sterilizes rapidly and reliably between 100 ml and 5 litres of aqueous medium and solutions. The combination of a large filter surface (20 cm2) and automatic deaeration ensures high flow rates and optimal capacity. The automatic air vent trapped through the vent ports protected by the PTFE membrane ensures that the entire filter surface is used for efficient filtration. Sartolab P20 Plus units have an excellent performance-quality ratio. Often, the total filterable volume can even be doubled thanks to the prefilter integrated in fiberglass without binder.
- Fast filtration
- Economic
- Security
Fast filtration
Fast filtration
Technical specifications
| General |
| Brand | Sartorius |
| Packaging | 10 units |
| Packaging | Individual bag |
| Range | Sartolab® P20 |
| Type of sample | Water |
| Performance |
| Flow | ≥ 450 mL/min at 1 bar |
| Total flow rate | Up to 10 L |
| Event | Yes |
| pH range | 1.0 – 10.0 |
| Volume | Up to 10 L |
| Dead volume | 1.2 mL before bubble point |
| Specifications |
| Filter vent | Yes |
| Filling bell | Yes |
| Prefilter | Yes |
| Physico-chemical characteristics |
| Moisture | Hydrophile |
| bubble point | ≥ 3.4 bar (49.3 psi) with water |
| Burst pressure | ≥ 5 bar (72.51 psi) |
| Without fibre release | This filter product meets the requirements of Chapter 21 of the Federal Regulations Code (CFR), Section 210.3(b)(6) and 211.72. |
| Retention threshold | 0.2 µm |
| Materials |
| Constitutive material of the membrane | Polyethersulfone (PES) |
| Prefilter material | Quartz Microfibers |
| Body materials | Polycarbonate (PC) |
| Physical characteristics |
| Filter diameter | ⌀ 61 mm |
| Dimensions of the housing | 49 x 61 mm |
| Filtration surface | 20 cm² |
| Connectivity |
| Inlet connection | Luer Lock female |
| Outlet connection | Hose Barb 6–12 mm Stepped |
| Terms of use |
| Operating pressure | 4 bar |
| Maximum operating temperature | 50 °C (122 °F) |
| Sterility |
| Delivery conditions | Sterile |
| Sterilization method | Ethylene oxide |
| Applications |
| Application | Clarification |
| Scope of application | Sterile filtration |
Origin and customs
| Manufacturer ref. | 18068----------D |
|---|
| Country of origin | Inde |
|---|
| HS customs code | 8421 29 80 00 |
|---|
A question or a specific configuration?
Contact us for a quote.