Invitrogen™ Dynabeads™ Protein G Immunoprecipitation Kit

Réf. : BL-RE-170261Réf. fabricant : 10007D 2 mL · Brown
590,00 € HT

Dynabeads Protein G Immunoprecipitation Kit is intended for immunoprecipitation (IP) and includes all reagents and buffers required to perform IP using your own antibody. The kit is optimized for standard IP, but can also be used for Co-IP…

Concentration
30 mg/mL
Matériau
Polystyrène magnétique
Contenu et stockage
• 2 mL Dynabeads Protein G
• 16 mL Antibody (Ab) Washing and Binding buffer
• 28 mL Washing Buffer
• 1 mL Elution Buffer

Store at 2°C to 8°C.

Diamètre (métrique)
2,8 μm
À utiliser avec (équipement)
KingFisher™ Sample Purification System, DynaMag™ magnets
Marque
Invitrogen

Dynabeads Protein G Immunoprecipitation Kit is intended for immunoprecipitation (IP) and includes all reagents and buffers required to perform IP using your own antibody. The kit is optimized for standard IP, but can also be used for Co-IP…

Dynabeads Protein G Immunoprecipitation Kit is intended for immunoprecipitation (IP) and includes all reagents and buffers required to perform IP using your own antibody. The kit is optimized for standard IP, but can also be used for Co-IP, chromatin IP (ChIP), or RNA IP (RIP). The kit includes the widely used Dynabeads Protein G magnetic beads with recombinant Protein G (∼17 kDa) covalently coupled to the bead surface. Both manual and automated protocols are available.

Benefits of Dynabeads Protein G Immunoprecipitation Kit include:

• Fast and easy—IP in less than 40 minutes with no columns, centrifugations, or time-consuming pre-clearing required

• High performance—high target protein yield with low antibody consumption

• Low background—very low non-specific binding with a high signal-to-noise ratio

• High reproducibility—uniform beads and optimized buffers help ensure consistent results

• Automation ready—automation protocols available with the KingFisher Sample Purification instruments

Gentle separation causes minimal physical stress to proteins

The magnetic separation technology utilized by Dynabeads Protein G beads is rapid and gentle, causing minimal physical stress to target proteins. This permits the isolation and concentration of labile composites that might otherwise dissociate or be damaged by proteases during long incubation times. Native protein conformation and large protein complexes are preserved.

Binding strength and antibody binding capacity

Dynabeads Protein G beads allow for the isolation of most mammalian immunoglobulins (Ig). The amount of Ig captured depends on the concentration of Ig in the starting sample and on the type and source of the Ig. 100 μL of Dynabeads Protein G will isolate approximately 25–30 μg human IgG from a sample containing 20–200 μg IgG/mL. Predominantly Fc-binding allows optimal Ig orientation.

Dynabeads magnetic beads are not porous in nature such as Sepharose or agarose resins. This means that all antibodies bind to the smooth outer surface of the beads and are thus available to bind to the target protein. This translates to a low antibody consumption while obtaining a high yield of the target protein. The smooth bead surface is also the reason for the low non-specific binding that Dynabeads magnetic beads are known for.

Dynabeads immunoprecipitation protocol is fast and easy

The manual IP protocol is simple and can be performed in less than 40 minutes with 3 easy bind-incubate-elute steps. The procedure does not require any pre-clearing due to the low non-specific binding and uses very little antibody while still obtaining a high IP yield, thus saving both time and cost per IP.

The antibody-coated beads can be used in a variety of IP applications such as Co-IP, chromatin IP (ChIP/ChIP sequencing), RNA IP (RIP, RIP sequencing), small-scale IgG purification, and protein purification. The isolated pure target protein can be used in downstream western blot, mass spectrometry analysis, sequencing, etc.

Automation-ready for use with KingFisher purification systems

The 2.8-μm magnetic beads are ideal for high-throughput enrichment. This process can be automated using any of our KingFisher sample purification systems

Our manufacturing sites are ISO 13485-certified. Bead characteristics and manufacturing conditions help ensure consistency and batch reproducibility making them an ideal choice for commercial supply. If you are in the process of customizing Dynabeads Protein G Immunoprecipitation Kit in a commercial product or service or need a larger bulk volume of this product, please contact us at [email protected] or see our Dynabeads OEM page.

Learn more about Dynabeads magnetic beads and KingFisher Sample Purification Systems:

• Dynabeads Protein G magnetic beads (Cat. No. 10003D) are also available separately, without the buffers

• See our immunoprecipitation selection table, data, and references

• Dynabeads magnetic beads selection guide

• See magnets for Dynabeads magnetic beads separations

• KingFisher automation protocols

• Watch a video about the KingFisher Flex instrument

*Sepharose is a trademark of GE Healthcare Bio-Sciences AB.

Rendement

Suffisant pour 40 Tests.

Formulation

Concentration : 30 mg/mL.

Compatibilité

Conçu pour une utilisation avec : KingFisher™ Sample Purification System, DynaMag™ magnets.

Applications

Co-immunoprecipitation.

Matériau

Matériau : Polystyrène magnétique.

Caractéristiques techniques

Général
MarqueInvitrogen
Réf. fournisseur (Fisher Scientific)10278723
Caractéristiques
Concentration30 mg/mL
À utiliser avec (équipement)KingFisher™ Sample Purification System, DynaMag™ magnets
Compatibilité à haut débitYes
Type d’échantillonCell Cultures, Clinical Sample, Supernatants, Tissue Digests, Cell Extracts, Serum
Gamme de produitsDynabeads™
Quantité2 mL
À utiliser avec (application)Co-immunoprecipitation
TypeIP Kit
Type de ligandProtéine G
Suffisant pour40 Tests
FormatKit
État réglementaireFor Research Use Only
Caractéristiques physiques
Diamètre (métrique)2,8 μm
Matériaux
MatériauPolystyrène magnétique
CouleurBrown
Conformité
Certifications/ConformitéISO9001 and ISO13485
Stockage et expédition
Contenu et stockage• 2 mL Dynabeads Protein G
• 16 mL Antibody (Ab) Washing and Binding buffer
• 28 mL Washing Buffer
• 1 mL Elution Buffer

Store at 2°C to 8°C.

Conditions d’expéditionAmbient Temperature

Origine et douane

Réf. fabricant10007D
Pays d’origineLituanie
Code douanier (SH)3822 19 00 00
Une question, une configuration particulière ?
Contactez-nous pour un devis.